Back to all reports

Entrance/Exit Mursley village from direction of A421 Buckingham Rd.

Reported in the Sign problem category anonymously at 14:49, Friday 6 March 2020

Received by Buckinghamshire Council moments later

As you travel from the A421 on the Whaddon Rd towards Mursley the speed limit is 50mph. As you enter the village the speed changes to 30mph. There are two speed signs, one on the left and one on the right. However, the one on the left says 50mph and the one on the right says 30mph. As you leave the village at the same point there is the same problem. You go from a 30mph limit to a 50 mph limit but the sign on the left says 50mph and the one on the right says 30mph. Essentially it looks like the speed signs on either side of the post above the 'Mursley' village sign are on the wrong side.

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • Thank you for your report which is currently under review.
    We will investigate this and if you have provided an email address, we respond to you within 10 working days.
    We will continue to update you by email (if provided) when your report reaches key stages.
    IMPORTANT: To report anything dangerous, please call us on: 01296 382416 (09:00 – 17:30 Mon-Thurs, 09:00 – 17:00 Friday) or 01296 486630 (out of hours and weekends).
    Regards
    Transport for Buckinghamshire

    Posted by Buckinghamshire Council at 14:50, Friday 6 March 2020

  • Thank you for your report.

    We have recorded it and will consider it when we are planning future works in the area. Please note we work on a priority based risk matrix in line with our Highway Inspection Policy and therefore programme times can change due to priority based working.
    Our Highways Inspection Policy can be accessed via the link below;
    www.buckscc.gov.uk/highwaysinspectionpolicy
    Regards
    Transport for Buckinghamshire

    State changed to: Action scheduled

    Posted by Buckinghamshire Council at 12:24, Wednesday 11 March 2020

Only the original reporter may leave updates. If you made the original report please log in to leave an update.